Features
Features
Securement: Deck comes with chain keyhole slots every 2’. | Jack: 1pr. Holland mark v 2-speed, heavy duty. | WINCH: 2 speed 30,000 lbs. Warn winch, 245 feet of 5/8 cable.| Axle Motion: Axles move on 4, 6” diameter rollers, powered by two 4” hydraulic cylinders. | Sliding axle speed is controlled by output of truck hydraulic fluid and is measured is gallons per minute | Hubs: 15" - 8 bolt piloted. | Mud Flaps: 1pr. behind fixed tridem | Conspicuity Tape: All round to D.O.T. Standards.
Construction Material
Main beams fabricated in house of T-1 100,000 yield plate 16” main beams. Crossmembers are 3” I-beam. All side rails fabricated T-1 upper deck is T-1 and HSLA plate fabricated main beams, 12” depth with 8” channel crossmembers and 10” deep outside rail.
Dimensions
Overall Length
48 Ft.
Width
Deck: 102” | Upper Deck: 102”
Kingpin Setting
Pin Set Back: 21”
Height
Coupler: 49” | 37”
Deck Height
Upper: 60” Approximate
Length
Upper Deck: Lower Deck: 10’
Dimensions
1 5/16” Apitong Decking | Lower Deck: 38’ X 102” | Approach angle when lifted is approximately 6 ½-8 degrees. | Storge: 2 – aluminum box 12” x 24” x 36” upper deck each side.
Chassis
Axle Count
3
Brakes
Brake System Type
12.25 X 7.5 C/W 30/30 Maxis; auto slacks & dust shields. | 2SIM Haldex
Lights and Safety
Lighting
LED strobe lights rear facing deck work lights stop, turn and running lights side marker lights
Wheels & Tires
Tires, Rear Specification
12 – 235/75r17.5 Cooper Tires
Wheels
Fifth Wheel Plate: 3/8” HSLA plate with 2” Holland SAE pin. | Hubs: 15"- 8 Bolt Piloted | 12-steel 8 bolt 6.75 X 17.5.
Hydraulics
Hydraulic Type
2-5” hydraulic cylinders at 2000 min to 3000 max psi | Wet line connection at front rail for tractor connection.
Electric
Electrical
7-wire cable harness C/W 7 pin plug. Junction box front of trailer
Capacities
Axle Capacity, Rear
23,000lb. X 77 ½”
Suspension
Suspension
3 – Hendrickson HT250 series underslung 6.5” Ride height, 60” x 60”x 60” C/W dump valve & load gauge.
