2023 Gerry's Tridem Axle Hydraulic Tilt Drop Deck Trailer Base

Information

2023 Gerry's Tridem Axle Hydraulic Tilt Drop Deck Trailer

Photos

Highlights

  • Edmonton, Alberta
  • 2023
  • Gerry's
  • Tridem Axle Hydraulic Tilt Drop Deck Trailer Base
  • Available
  • Upper Deck: 102” | Beavertail: 102”
  • Lower Deck: 33’ x 102” x 36” with 2 ¼” oak decking

Specifications

  • 2023
  • Gerry's
  • Tridem Axle Hydraulic Tilt Drop Deck Trailer
  • Base
  • Lowboy
  • Jack: 1pr. Holland mark v 2-speed rectangular foot.
  • Beavertail: 8' x 102” c/w 5' x 40” wide air ramps all wood decking with tapered steel tips to lay approx flush with ground when deck tilted up. Note: air ramps are 2 ¼” oak covered with tapered steel tip & operate with one air bag. Hyd. dampening cylinder & ball valve air control in rail at front of b/t.
  • Main beams fabricated in house of t-1 100,000 yield flanges & web 22” depth to 13” over axles. Crossmembers are 6” I-beams first 8’, balance 6” channel. All side rails fabricated T-1 10” I-beams. Upper deck is T-1 and HLSA plate fabricated main beams, 12” depth with 4” channel crossmembers and 8” channel outside rail [ legs in] with rub rail & pockets. | Boom Rest: Rienforced ½” steel plate welded to main chassis beams Centre rear of deck just ahead of beavber tail.
  • 1-5/16” Apitong shiplap decking
  • 102”
  • Front (with 48” coupler) 60" | Rear (full air) approx. 36” | Rear (full air) approx. 36”
  • Upper Deck: 11’-0” | Beavertail: 8’
  • 22’-35’ | Bridge: 15’
  • Upper Deck: 102” | Beavertail: 102”
  • Lower Deck: 33’ x 102” x 36” with 2 ¼” oak decking
  • 3
  • 12.25 X 7.5 c/w 30/30 maxis, Haldex auto slacks, enclosed cams, outboard drums & dust shields.
  • 3/8” HSLA plate rienforced with 6” & 4” st’d channel & 2” Holland SAE pin with 18” setback. | Eight bolt piloted, tapered spindles & bearings oil bath & sight covers
  • 12– Continental HTL-2 Eco Plus 245/70R 17.5. | 12- eight bolt 6.75 X 17.5 Alcoa aluminum st’d polish.
  • Dexter 22,500 lbs x 5” rd. X 79 ½”” 72” / 72” spread.
  • Hendrikson 25,000 lbs 6.5” Underslung c/w dump valve & load gauge in stainless steel control box under deck roadside for manual or cab control of forward lift axle.
  • Tare: 10,700 KG Approx